If you’re wondering how to build shower niches, then you’re in luck. The process of building one is easier than you might think! These tips will help you choose the material and design of the shower niche, install HYDRO-BLOK boards on your shower walls, and waterproof the base of your new niche. Keep reading for a step-by-step guide on the topic. Once you’ve finished reading this article, you’ll be well on your way to building your very own shower niche.
Installing HYDRO-BLOK Boards on shower walls
When installing HYDRO-BLOK Boards for shower walls, you need to follow a few basic steps. For example, before installing the wallboard, you need to apply a bead of joint sealant along the back panel. After this, you need to place the board pieces in the niche, overlapping the pieces on the left and right sides. This will form a watertight seal.
After you have prepared the wallboard, you can begin to install the board on the shower wall. Generally, you will install two boards, separated by about eighteen inches. When installing the next two boards, you should apply joint sealant to both sides and use washers over the joints to encourage flush edges. It’s important to make sure that you use sealant on the joints, as surface applied joints aren’t compatible with the Hydro-Blok board.
Designing a shower niche
The first step in designing a shower niche is to determine its size. It should be at least the width of the shower wall, but not smaller. This will give the niche a seamless appearance. A long, linear niche can add interest and storage space. Alternatively, a long, narrow niche can be a functional storage space. Whatever the design, it is important to consider the space in the niche before determining its materials and installation method.
The shape of a shower niche is completely customizable. You can even get creative with it. For instance, you can use the design of your wall tiles to guide you. Then, you can divide the space into two sections for easier organization. For extra storage, you can install shelves. If you have two separate sections, you can create a vertical shelf to hold more shampoo bottles and other shower accessories. It will also keep the bathroom looking neat and organized.
Choosing a material for the niche
There are several factors to consider when choosing a material for the shower niche. For example, choosing a niche with a bullnose is important because this will create a window-like appearance. The front edge of the niche must be mitered where it meets the wall tile. The tile should slope outward to shed water, with a slant of about 1/16 inch for every three inches. To make the edging look attractive, you should choose a tile with an even texture and a good sheen.
A corner seat is usually the focal point of the shower, so choosing a niche that doesn’t compete with it will be a good idea. A shower niche made of glass can also be a good option because it creates a subtler look and can be reasonably priced. Be sure to order backups of the glass you choose for the rest of the bathroom if it’s made of glass. Once you have chosen the shape of the shower niche, think about what you plan on storing in it.
Waterproofing the base of the niche
Once you’ve completed your shower’s design, it’s time to waterproof the base of your niche. There are many ways to do this, from liquid waterproofing to sheet membranes. In either case, you need to precut your niche, apply sealant in all corners, and then apply a thick coat of liquid waterproofing to the entire niche. Apply the waterproofing solution to all exposed areas of the niche using a paintbrush, paying particular attention to the bottom shelf. Once it’s thoroughly dry, repeat the process with a second coat.
The base of the shower niche should be made of a thin set mortar that is applied to the niche. This mortar should be 1/4 inches thick and slope outwards. This slope ensures proper shower drainage. An optimal slope is about 1/16 inch from back to front. To ensure that the shower drains properly, you also need to install seams on the bottom of the shower pan. The bottom of the shower niche panel should also be sealed to the floor.
Choosing a tile for the niche
A shower niche is the perfect place for a little bit of luxury. Adding a glass door to your shower makes your niche look more elegant. You can also choose a tile that increases in size over time, achieving an asymmetrical look. Glass doors are a great choice for this niche because they take advantage of the reflected light from the shower. The contrasting pattern of large and small tiles creates a striking contrast in your monochrome shower. While the opulence of the large tiles may give you a feeling of luxury, smaller mosaic detail will blend in with the wall.
It is important to consider the size of the niche and the size of the tile. If the niche is small, it may be difficult to tile if it is too large. Make sure the tile can fit into the niche and has the same depth. You can also use mosaic tiles, but you should make sure to purchase them in the right size. To ensure proper installation, use tiles that are designed for niches. If you’re not sure what size tile to choose, try to work with a contractor who can help you plan the area.
Choosing a height for the niche
When installing a shower niche, you should choose the right height for the area where you’ll put the bottles. A normal height is 1.5 feet, but you may want to make it taller if you want to accommodate more bottles. Ideally, you’ll want to install the niche on the right side of the shower. This way, you can extend your right hand and still get access to your toiletry.
Choosing a height for the shower niche depends on your personal preference, but most people prefer a height that is approximately 36 to 60 inches off the floor. This height makes it easier to reach items in the shower, such as soap and shampoo bottles. If you’re installing a shower niche over a bathtub, consider the height you’ll reach from sitting in the bath. Consider the height of the shower niche, as well as the height you’ll need to bend when you’re standing.