You can build steps for your mobile home using wood, concrete, fiberglass, or premade steps. There are different kinds of steps, each of which has its own advantages and disadvantages. Listed below are the advantages and disadvantages of these materials. You can also choose a product that has already been built, if you don’t have the time or money to build your own. You’ll need to follow building codes to ensure that your steps are safe and functional.


If you’re building a new porch or steps for your mobile home, you’ll probably be using stringers attached to the outside of the structure. These are the pieces that support the riser boards and treads. It’s important to secure them with galvanized carriage bolts, as these are stronger and less likely to split the framing. You can also install a wooden banister using nails and wood glue. Make sure to check with the building department to ensure that the steps are secure.

Mobile home steps require a concrete pad underneath them to avoid the steps sinking, soaking in water, or rotting. But the advantages of wood over concrete are numerous. Unlike concrete, wood steps are much lighter than their concrete counterparts, making them ideal for winding staircases and tall steps. Concrete stairs will require additional support, while wooden steps won’t cause any significant weight on the floor. These pros and cons of wooden steps make them an excellent choice for mobile homes.


Before you begin building concrete steps, you’ll need to prepare your work area. The steps will lie on a subbase of 3/4″ construction grade plywood, and should be sloping away from the door to prevent water from collecting. Make sure to use two identical pieces of plywood. You can tamp these steps with a hand tamper or a plate compactor machine. Be sure to keep an inch of space around them before putting concrete into them.

There are several options for building concrete steps for a mobile home. They are more durable than wooden steps, but they do require extra ground preparation. A two-step set can be moved with two strong men, but a large set will require a forklift or hoist. Another advantage of concrete steps is that they are weather resistant. They won’t chip or lose structural integrity, which is important for mobile homes.


If you’re restoring an old mobile home and need a new insulating material, you may be wondering if fiberglass is right for your project. Fiberglass insulation is a lightweight alternative that creates an airtight seal without tearing down drywall or plaster. The difficulty level of the installation process depends on the type of siding and other factors, such as the temperature outside. For this reason, fiberglass insulation is one of the most common choices for resurfacing mobile homes.

While the fibers of fiberglass are small and easy to breathe, they can cause health problems. They can irritate skin and cause allergies. Also, fiberglass insulation is attractive, but it’s also unavoidably critter-friendly. Unfortunately, fiberglass insulation is often installed incorrectly, meaning that it’s installed inside out. It also has a tendency to allow a significant amount of air to enter or exit a building, which can result in high energy bills.

Premade steps

You may want to install premade steps in your mobile home. This can save you money, but it’s important to understand the terminology for mobile home steps. For starters, you need to understand the term “riser,” which is the height of the vertical space between each step. This height is often dictated by local code requirements. Secondly, you need to understand what the riser is, and how to measure it.

The width of the tread should be at least 10 inches from bull nose to bull nose. The overhang should be between 3/4″ and one-and-a-half” deep, with no variation of 3/8″. Finally, the angle of incline should be between 34 and 37 degrees. Before you make a purchase, you should check the local building codes for the requirements for a mobile home staircase. This is important in order to avoid voiding the warranty.

Building codes

The International Residential Code and the Building Code require the construction of permanent foundations for manufactured/mobile homes. In addition to the foundation, manufactured/mobile homes must have approved skirting around their perimeters. Unless the manufactured/mobile home is located in a designated manufactured/mobile home park, it must be permanently supported by a foundation that satisfies these construction codes. The HUD-code manufactured home handbook includes technical information, recommendations, and analytical tables. This code clarifies what constitutes a permanent foundation and updates the 1989 loading requirements. The HUD-code for manufactured homes also discusses foundations, including the differences between proprietary and nonproprietary foundations.

As a mobile home is not permanent, its occupancy is not allowed to change without meeting the applicable code requirements. If the mobile home ceases to meet the code requirements, it will cease to be classified as a manufactured home. The federal government has developed the National Manufactured Housing Construction and Safety Standards Act (CMHSSA), which sets guidelines for the construction of manufactured homes. These guidelines are meant to ensure the safety and health of the residents of these homes.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.