Cleaning your ducts is not an insurmountable task. But if you are handy with tools, you can do it yourself and save money. You need a vacuum cleaner with a hose and nozzle attachment, and a brush. A toilet brush or a large paintbrush can do the job, too. Use a screwdriver to remove vent covers and wipe down the dust. Cover supply registers with paper towels. Replace the air filter, and wipe out the remaining dust. If you have to remove the vent covers, you can wash them in a dishwasher or just hand-wash them.

How to Clean Ducts DIY

Once you’ve cleaned the ducts, you can use a vacuum with a special nozzle and a squeegee to clean the openings. Using a hose with a nozzle will prevent any dust from blowing out of the supply registers and onto the floor and walls. You can also use paper towels to block the push vents. Be careful to wrap these tightly, as they may not hold the high pressure of air that a vacuum cleaner can produce. This can blow the vents off and allow loose dust to return into the home.

Using a vacuum cleaner with a HEPA filter is ideal for cleaning air ducts. A HEPA filter helps prevent dust from reentering the ducts. Once the ducts have been cleaned, replace the air filters and replace the vent covers. This will help prevent mold and mildew from growing in the ducts. It is also important to check the ducts for leaks and other cracks. Keeping your air ducted system clean and working efficiently will prevent many health problems and money.

During the cleaning process, you need to cover the supply registers. If you fail to cover the supply registers, the air quality in your home will suffer. It can also ruin the hard work you’ve done. To prevent this from happening, you can cover the push vents with paper towels. However, paper towels won’t hold up under extreme pressure and blow out the vents, allowing dust and debris back in.

The next step of duct cleaning is to cover supply registers. If you don’t cover the supply registers, you’ll ruin the previous work and impact the air quality of your home. You can use paper towels to block the push vents. Although these are good for covering a few supply registers, they don’t hold up to extreme air pressure. This could cause a lot of damage. It is better to have a professional do it for you.

Using a damp cloth to clean the walls of the duct is a good idea. You can also use a longer brush to reach all the places you can’t reach. Once the walls have been cleaned, you can use a vacuum or broom to remove any remaining debris. When you’re finished, remember to return the covers after cleaning, or you may have to hire a professional again.