How to Install Handrail on Garage Steps

If you want to put a handrail on your garage steps, the first thing you should do is purchase some brackets. These must mount at each wall stud, but it may take 4 brackets to secure your railing to the wall – this will depend on the size of your handrail. You’ll also need a drill to make pilot holes. You may also want to invest in a miter saw to make clean cuts.

Steel handrails

Steel handrails for garage steps are an affordable way to increase safety. Unlike wood, steel is maintenance-free and durable. They are available in smaller, 3/4-inch parts that are 20 percent less expensive. Although wood is cheaper, it will eventually rot and require replacement. Besides, wood requires you to keep an eye out for loose nails. Steel handrails last for years and look good. These can be installed quickly and easily.

Another popular material for handrails is wrought iron, which is an iron alloy with a low carbon content. It was popular for decorative purposes in the mid 1800s but is now not mass-produced. It’s still produced for restoration purposes, and it makes a beautiful accent for a garage. Wrought iron handrails are great for outdoor and indoor steps and can also be used on straight steps. Aluminum handrails are less expensive than steel but are less durable.

Wooden posts

There are a few steps that you must follow to properly install wooden posts on your garage steps. First, you must purchase pressure treated wood that is rated for ground contact. Make sure that the wood is straight and long enough to bury the post in the ground. Next, you should secure the wood with wood screws or use stakes that are 4″ long. These wood stakes will act as braces and help you maintain vertical leveling. Make sure to also measure for plumbing and install the appropriate type of wood.

Next, you should dig the holes. Dig about 8 inches in diameter for a 4×4 post and 10 inches in diameter for a 6×6 post. Once the hole is dug, add a 6″ layer of gravel to the base to level the ground. Then, start setting your posts in the ground by moving the strings toward the outside edge of the layout. Next, use the plumb bob to locate the center of the posts and mark them with a pencil. You can also use a tripod or a telescope to help you with the measurements.

Power Grip

Choosing a handrail for garage steps can be a tricky task. There are many options available. Wood is a classic choice for a railing, but you may want to consider using steel. Steel is a versatile material, and it can be used both indoors and outdoors. Compared to wood, steel has better durability and is often more expensive. In addition, steel requires specialized equipment to install and adjust on-site. Aluminum is a natural element, with a lower density than other metals. Aluminum is reflective, and naturally resistant to rust and corrosion.

Before installing the handrail, measure the height of the stairs. Use a stud finder to locate the studs on the stair’s front edge and wall. Make sure to measure 36 inches above the stair’s bottom tread. Then, measure the height of the handrail, including the top and bottom of the stair nosing. Mark the height of the rail to align it with the stair’s top edge. Once the measurements are done, attach the brackets to the wall.

Trex RainEscape deck drainage system

Before you begin installing a handrail, consider installing a deck drainage system like Trex RainEscape. This system helps prevent water damage to your deck by funneling excess water into the gutters. If you plan to install a handrail on your garage steps, this system is an excellent choice. Its drainage system is effective for both outdoor and indoor environments. In addition to being aesthetically pleasing, the RainEscape system allows you to store things underneath the deck, such as bicycles or gardening tools.

Installing a Trex RainEscape deck drainage system is easy. Just cut the troughs to fit your deck boards with a utility knife, then secure them using a staple gun or caulk. Once installed, you can waterproof the entire system with caulk or flashing tape. This deck drainage system is the most affordable brand name product available. RainEscape costs about $5 per square foot and is easy to install. It also leaves plenty of room for a finished ceiling, flush to the joists.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.